![]() They should be good for 3000-4000 copies, if you don't print many larger areas of "dark". A print quality (PQ) test page is a diagnostic tool which is designed for accurate and effcient diagnosis of PQ defects. If you cut a hole, you will end up with plastic chips in the toner cartridge, which is not a good idea.Īftermarket cartridges are now available for maybe $40 delivered. You have to heat a 1/2" copper tube, and melt a hole in the side of the cartridge, then seal it with modeling clay after refilling it, which is more than some are willing to go through to refill the cartridge. One caveat - the newer cartridges do not have a plug for refilling them. ![]() I would never buy an ink jet printer for B&W printing, after seeing how these inexpensive B&W laser printers keep pumping out excellent copies for cheap. Other than the fact it does not do duplex printing (automatically print on both sides of the paper), they were well worth the $110 I paid for these printers, after sales tax and rebates. Total cost, minus paper, was about $125.00, or one cent per copy. I ran off 12,000 pages on the same cartridge, after refilling it several times with toner available on eBay. The print quality was more than adequate. This document contains instructions for printing self-test pages, including Configuration Report, Supplies Status Page, Network Summary page, Usage Page, and Service Page. I used one to print a club's newsletter for a year, which required refilling the cartridge with toner several times. HP Color LaserJet Pro M255 Printers - Printing Self-Test Pages This document is for HP Color LaserJet Pro M255dw and M255nw. I've bought several of these printers for several people, several years ago.
0 Comments
Leave a Reply. |